Composite hose made from polypropylene fabrics and films with an abrasion-resistant PVC coated fabric cover, reinforced with internal and external wire helixes. The hose is lined with layers of PTFE film. The hose can be covered with rope lagging for external protection if required.

Principal Applications

Solflon is suitable for the transfer of the most aggressive chemicals and searching solvents. The PTFE liner has a low coefficient of friction making the hose also suitable for the conveyance of high-viscosity products such as paint.


Inner wire : SS 316L
Lining : PTFE Film
Outer cover : PVC Coated Terylene Weave Fabric
Colour Code : Red outer cover with white stripe
Outer Wire : Galvanised zinc coated mild steel

Physical Properties

Max. Elongation : 10% on proof pressure

Maximum Twist : 10° /mtr
Vacuum range : 0.9 bar
Electrical resistance : 2.5 Ohms/mtr < 2” Hose

1.0 Ohms/mtr > 2” Hose

Manufactured to the specifications where applicable to EN 13765 Type 2

Depending on the conveyant -30°C to +100°C

Special application   

Solflon can be supplied with SS 316L outer wire also. This hose is called Solflon S. (Red outer cover with yellow strip).

Solflon can be supplied with PP coated inner wire also. This hose is called Solflon P. (Red outer cover with Parrot green strip).


Bore diameterBend radiusMax work. pressureWeight/meterMaximum length


Minimum Burst Pressure: 4 times Working Pressure (safety factor 4:1)

Send us your enquiry

Our customer service is always open to receive any inquiry or feedback. Please feel free to drop us an email from the form below and we will get back to you as soon as we can.


More in-depth information about hoses is available in our datasheet.