Composite hose made from polypropylene fabrics and films with an abrasion resistant PVC coated fabric cover, reinforced with internal and external wire helixes. The hose contains a barrier layer for 100% aromatic hydrocarbons.
Transfuel Light is a light weight suction discharge hose mainly for the transfer of petroleum products by road and rail tankers, for applications where the weight of the hose is an issue. The aluminium inner wire provides the lighter weight. The crush resistance of the hose is not as good as with a hose with an inner and outer steel/steel wire. This hose is suitable for Aviation Fuel.
Manufactured to the specifications where applicable to EN 13765 Type 2
Depending on the conveyant -20°C to +80°C
Special application Transfuel light can be supplied with outer wire in Aluminium also. This hose is called TRANSFUEL Light Light Anitispark composite hose with yellow outer cover. We can supply these hoses with aluminium ferrule.
|Bore diameter||Bend radius||Max work. pressure||Weight/meter||Maximum length|
Minimum Burst Pressure: 4 times Working Pressure (safety factor 4:1)
Inner wire : Aluminium Max.
Lining : Polypropylene Fabric
Outer cover : PVC Coated Terylene Weave
Colour Code : Yellow outer cover with white stripe
Outer Wire : Galvanised zinc coated mild steel
Elongation : 10% on proof pressure
Maximum Twist : 10° /mtr
Vacuum range : 0.9 bar
Electrical resistance : 2.5 Ohms/mtr < 2” Hose | 1.0 Ohms/mtr > 2” Hose
Send us your enquiry
Our customer service is always open to receive any inquiry or feedback. Please feel free to drop us an email from the form below and we will get back to you as soon as we can.
More in-depth information about hoses is available in our datasheet.