Composite hose made from polyester and polyamide fabrics and films, reinforced with internal and external wire helixes.
Transgas hose in general is suitable for the transfer of cryogenic conveyants down to – 50°C, liquid petroleum gas (LPG) handling and can be used for other conveyants as per Conveyant Compatibility Guides, to transport LPGs, it is standard practice to liquefy them either by refrigeration down to -50°C, or by pressurisation at approximately 20 Bar pressure at ambient temperature..
Inner wire : SS 316L
Lining : Polyamide Fabric
Outer cover : Polyamide fabric
Colour Code : White outer cover
Outer Wire : SS 316L
Elongation : 10% on proof pressure
Maximum Twist : 10° /mtr
Vacuum range : 0.9 bar
Electrical resistance : 2.5 Ohms/mtr < 2” Hose | 1.0 Ohms/mtr > 2” Hose
Manufactured to the specifications where applicable to EN 13766 Class A Type 1 (25-100mm).
Note : The 150 and 200mm hoses have a lower pressure rating than the above Standards and due care must be taken in their selection.
Temperature range from -50°C to +45°C
|Bore diameter||Bend radius||Max work. pressure||Weight/meter||Maximum length|
Minimum Burst Pressure:4 times Working Pressure (safety factor 4:1)
Send us your enquiry
Our customer service is always open to receive any inquiry or feedback. Please feel free to drop us an email from the form below and we will get back to you as soon as we can.
More in-depth information about hoses is available in our datasheet.